[OMCP] 12.6" High Temp Vinyl Insertion Plug (CMCP2H) Material: Black High-Temp Vinyl
SKU
CMCP2HB
SKU# CMCP2HB
- Buy 52 for £36.44 (£0.7007 each)
- Buy 528 for £129.62 (£0.2455 each) and save 65%
- Buy 2640 for £251.59 (£0.0953 each) and save 86%
- Buy 5280 for £448.80 (£0.0850 each) and save 88%
- Buy 10560 for £685.34 (£0.0649 each) and save 91%
- Buy 26400 for £1,631.52 (£0.0618 each) and save 91%
- For larger quantities, please contact us for a custom quote.
Click to get a shareable link to current item config
Copied to Clipboard
High Temp Vinyl Insertion Plugs (OMCP)
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
Additional Information
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.