[OMCP] 26.9" High Temp Vinyl Insertion Plug (CMCP55H) Material: Black High-Temp Vinyl
SKU
CMCP55HB
SKU# CMCP55HB
- Buy 26 for £29.56 (£1.1370 each)
- Buy 268 for £107.28 (£0.4003 each) and save 65%
- Buy 1344 for £445.13 (£0.3312 each) and save 71%
- Buy 5376 for £848.87 (£0.1579 each) and save 86%
- Buy 10752 for £1,254.76 (£0.1167 each) and save 90%
- Buy 26880 for £2,884.22 (£0.1073 each) and save 91%
- For larger quantities, please contact us for a custom quote.
Click to get a shareable link to current item config
Copied to Clipboard
High Temp Vinyl Insertion Plugs (OMCP)
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
Additional Information
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.