[OMCP] 38" High Temp Vinyl Insertion Plug (CMCP7H) Material: Black High-Temp Vinyl
SKU
CMCP7HB
SKU# CMCP7HB
- Buy 27 for £48.54 (£1.7979 each)
- Buy 302 for £192.83 (£0.6385 each) and save 64%
- Buy 2754 for £1,205.70 (£0.4378 each) and save 76%
- Buy 5508 for £1,603.38 (£0.2911 each) and save 84%
- Buy 11016 for £2,586.56 (£0.2348 each) and save 87%
- Buy 27540 for £5,362.04 (£0.1947 each) and save 89%
- For larger quantities, please contact us for a custom quote.
Click to get a shareable link to current item config
Copied to Clipboard
High Temp Vinyl Insertion Plugs (OMCP)
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
Additional Information
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.
MOCAP High Temperature Vinyl Plastic Masking Plugs are a low cost quality answer to your masking needs. Flexible material allows these plastic plugs to seal threaded and non-threaded openings. Special high temperature resistant vinyl material withstands up to 446°F(230°C).
For more information, see our OMCP Series page.
NOTE: Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by +/-1.6mm (1/16") from the figures shown above.
Wall thickness is measured approx. 6.35mm (.25 inch) from open end. Wall thickness increases slightly towards the closed end of the part
Micropacks are only available for purchase through our online store.